IAE logo
Home » Agriculture Products » Cattle Equipment » 2 in 1 Cattle Feed Fence Gate Units
Cattle Equipment

2 in 1 Cattle Feed Fence Gate Units

  • Heavy duty diagonal feed fence c/w 4 x 25mm sleeved hinge eyes and 2 x coupling bars
  • Supplied with 2mm thick detachable steel feed troughs (Hot Dipped Galvanised) which are available in 3 sizes
  • Offers flexibility in that the gate can be opened from either end providing easy access to the pen
  • Fixed 2 in 1 units and single acting gate type units are available upon request
  • 2 in 1 Cattle Feed Fence Gate Units

Overview

The 2 in 1 cattle feed fence gate is a robust feed fence and trough unit designed to allow the cattle to feed away from the floor.

Note:

  • The 2 in 1 cattle feed fence gate units that are over 4880mm long will have troughs fabricated in two sections which may be of unequal length
  • All 2 in 1 double acting gate units are approximately 305mm shorter in length than the stanchion centre to centre dimension

This equipment is Hot Dip Galvanised to BS EN ISO 1461, however, where the equipment will be in prolonged contact with silage or other mineral rich water, it is recommended that food safe or non-toxic epoxy is applied to areas of the product which will be in contact with silage, feed or water before use, and then periodically thereafter when it is empty, clean and dry in order to prevent corrosion of the steel and zinc and therefore extend the life of the equipment.

  • Heavy duty diagonal feed fence c/w 4 x 25mm sleeved hinge eyes and 2 x coupling bars
  • Supplied with 2mm thick detachable steel feed troughs (Hot Dipped Galvanised) which are available in 3 sizes
  • Offers flexibility in that the gate can be opened from either end providing easy access to the pen
  • Fixed 2 in 1 units and single acting gate type units are available upon request
  • 457mm wide x 216mm deep x 2mm detachable Galv Steel Trough
  • F030 2110 15 - 4575mm stanchion centres
  • F030 2110 20 - 6100mm stanchion centres
  • 610mm wide x 255mm deep x 2mm datachable Galv Steel Trough
  • F030 2112 15 - 4575mm stanchion centres
  • F030 2112 20 - 6100mm stanchion centres
  • 760mm wide x 355mm deep x 2mm detachable Galv Steel Trough
  • F030 2114 15 - 4575mm stanchion centres
  • F030 2114 20 - 6100mm stanchion centres
  • Vertical Plate Stanchion plate
  • F016 0020 25 25mm h/eye on vertical drilled plates each
  • F016 3120 40 - Pack of 4(no) M12 x 40mm bolts and nuts
  • Angle Bracket Stanchion Fittings
  • F030 2013 30 To suit 100mm stanchion
  • F030 2013 21 To suit 135mm stanchion
  • F030 2013 22 To suit 145mm stanchion
  • F030 2013 23 To suit 150mm stanchion